BRAND NEW….JUST ARRIVED……..SLIDING GUIDE FOOT FOR 9MM MACHINE MODELS

Remember the Sliding Guide foot for 7mm Janome machine models? Well, the good news is that we asked for the same foot for 9mm Janome machine models and …….good news is that these are now available in Canada…..WOOHOO, I am so pleased to announce this foot as it is a very useful addition to the wide range of optional accessory feet that Janome offers our loyal customers.

NOW AVAILABLE FOR JANOME 9MM WIDE STITCH MACHINE MODELS

SG FOOT IS NOW AVAILABLE FOR JANOME 9MM WIDE STITCH MACHINE MODELS

So what is it? What does it do?  A great (& often overlooked) place to start is the package insert instructions. YES, please don’t throw that cardboard out when you open up your new Janome foot. It often opens up like a little booklet with more information inside…….as below:

DSCN0519

Notice the little grey clip at the back right of the foot? This allows you to move the sliding guide left right along the bar so that you may use the guide effectively from 3/8 inch all the way to over an inch 1). Click this grey clip back to hold the guide in your selected position

Notice the little grey clip at the back right of the foot? This allows you to move the sliding guide left right along the bar so that you may use the guide effectively from 3/8 inch all the way to over an inch 1). Click this grey clip back to hold the guide in your selected position

Move the needle position and you get even more width options with this foot from a scant 1/4 inch to more than an inch – 1 & 5/8 inches. Pretty cool, don’t you think?

I just quickly stitched in blue thread for photographic purposes.

I just quickly stitched in blue thread for photographic purposes.

This foot has lots of practical possibilities:

  1. 5/8 inch and other width seams have never been easier to get accurate.
  2. Top stitching on pockets, colours, home decor projects just got wonderfully more creative and easy to keep straight & even.
  3. Why stop at straight stitching? Use this foot for all sorts of decorative embellishment where precise positioning is required. This foot makes very light work of such techniques.
  4. Heirloom sewing techniques might just have acquired a new best friend – the Sliding Guide foot!

Part # for 7mm machine models 202218005

Part # for 9mm machine models 202293004

Can you think of more techniques and sewing projects you would use this foot for?

 

About lizafrica

I work in the Education Dept at Janome & Elna, Canada and LOVE to sew. I have been employed full time in the sewing and quilting industry for almost 30 years so I bring a wealth of sewing knowledge & expertise to this blog. I enjoy all forms of sewing from quilting to sewing garments to machine embroidery and software. Pretty much everything in my life is seen through the eyes of a passionate sewer! I am constantly on the look out for fun, innovative and inspiring ideas to share with you all on this blog. I also love to read, knit , travel and spend time with my family and friends.
This entry was posted in Janome Accessories, Janome Sewing Machine and tagged , , . Bookmark the permalink.

16 Responses to BRAND NEW….JUST ARRIVED……..SLIDING GUIDE FOOT FOR 9MM MACHINE MODELS

  1. Ceil says:

    I tried to order this from Allbrands (who usually have all the feet) and they said their supplier claims it isn’t available 😦

    Like

  2. Diane says:

    Hi Liz,

    Will this foot work with my MC6600P?

    Diane

    Like

    • lizafrica says:

      No, Diane, not this 9mm one as the 6600P is a 7mm machine model. HOWEVER, we have had a 7mm Sliding Guide foot for over a year which will work with your 6600P. Part # 202218005

      Liz
      JANOME CANADA

      Like

  3. Donna says:

    Will the new foot work on my 12000?

    Like

    • lizafrica says:

      Hi Donna,
      Your MC12000 is a 9mm machine so yes, the Sliding Guide foot works with your machine. There is also a 7mm one available for JANOME 7mm models.

      Liz
      JANOME CANADA

      Like

  4. Linda says:

    This is on my buy list! So glad it is finally available.

    Like

  5. Karen Price says:

    Hello, could you please tell me the part number for the 9mm Sliding guide Foot? Thank you.

    Like

  6. R MacKinnon says:

    what is the part number for this foot and where can I buy it? I live in Washington State, USA? I looked at the corporate website for Janome USA and don’t seem to find this foot there.

    Thanks R MacKinnon

    ________________________________

    Like

    • lizafrica says:

      Hi,
      Sorry, in my excitement to share this information I forgot to put in the part #’s. I have now added them to the blog post at the bottom. It probably is not on the janome.com website yet as it is very new.

      Liz
      JANOME CANADA

      Like

  7. Donna M from Snip and Stitch says:

    Yahoo!

    Like

  8. Sonia says:

    question will the new foot work on the 11000

    Like

    • lizafrica says:

      No, Sonia, because the Janome MC11000 is a 7mm machine model. However, we have already had this exact same foot for 7mm machines for over a year. Part # 202218005. Please see a previous blog post on December 3, 2014 entitled “All I want for Christmas ……is the NEW Janome Sliding Guide foot” (or search for sliding guide foot in the search box)

      Liz
      JNAOME CANADA

      Like

  9. cherylsewing says:

    The SG foot sounds wonderful. Can’t wait to get one. Thanks for keeping us up to date with all the new things. I’m working at getting to understand the Artistic Simple Cut Software. It is coming because the girls that own the Edge Cutter are challenging me to learn it so that I can teach it. Quite a challenge, but it really keeps me working at it. Understanding how the software works is not my easiest challenge but it’s coming. If you have any extra hints, I’d be interested in knowing about them.

    Like

    • lizafrica says:

      Hi Cheryl,
      Glad you like the Sliding Guide foot. It is a most useful addition to our range of accessories.
      The notes you got at the recent Artistic Edge training are pretty detailed. Plus don’t forget the Edge video’s on You Tube & iTunes. There are more coming in the next few months too. And also go through the Quick Start Guide + the resources I pointed you all towards.
      My biggest tip: the more you use the Simple Cut and the Edge cutter, the easier it becomes. Practice makes perfect!

      Liz
      JANOME CANADA

      Like

Share your comments

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s