One of my favourite combinations on the Janome MC9400 is the HP foot and needle plate. As a quilter, I value the ability of a sewing machine to make a good straight stitch and a perfect 1/4″ seam. I get both by using the HP foot and needle plate and it’s become my go-to set up for piecing.
I know that not everyone who uses the Janome MC9400 is a quilter: some may be using this machine for sewing garments and, if this is your preferred type of sewing, you’ll love the HP foot and needle plate too.
When you install the HP needle plate, the Janome MC9400 automatically cancels out any stitches that can’t be created when this needle plate is in place and advises you as to which straight stitches are available. This prevents you from choosing a stitch that wouldn’t work with this single stitch needle plate.
There are several straight stitch choices to choose from and, by altering the length of these stitches, you can create variations on these beautiful straight stitches. Lots of stitches to choose from that would be suitable for top stitching on collars, hems, and cuffs.
Read more about the straight stitches available with the Janome MC9400 HP foot and needle plate and watch it in action in the video on my blogpost.
The Jnaome HP foot and needle plate is compatible with MC15000; MC6700 and MC9400.
Happy stitching from Kim Jamieson-Hirst, a Janome Canada Artisan in Calgary, AB.
Does a ruler foot work on skyline s5
LikeLike
Hi
Yes it does. Not the QR foot but you may use the Convertible Free Motion foot set + “Ruler foot” part # 767454005.
Liz
Janome Canada
LikeLike
I bought the 6700 earlier this year and I also love using the HP kit.
LikeLike
I like the dual extra thread holder. On your 9400. I tried to purchase at Amazon but says it’s for 8900
LikeLike
Hi Geri,
It is always best to ask your local authorized Janome dealer for the information you require. I am not 100% sure which dual thread holder you are referring to? Do you mean the extra spool pin? If so, it does come with the MC9400 and your dealer should be able to order it for you. Or did you mean the Spool stand for 2 spools? Again – your dealer can order this for you.
Liz
JANOME CANADA
LikeLike
Would this work on the Janome 9000?
LikeLike
Hi Valdine,
Unfortunately not.
Liz
JANOME CANADA
LikeLike
I was wondering why this foot and plate would not work on the Janome 12000?
LikeLike
Hi Linda,
The HP foot and plate works together with features and firmware in the machine. It is not simply a matter of exchanging the needle plate and foot. There are only 4 specific stitches that may be used with this system and they all have altered needle positions to accommodate the foot & plate. There are only 3 models that have the correct firmware and needle plate sensors to be compatible with this foot and plate. The MC12000 does not have this system. Sorry.
Liz
JANOME CANADA
LikeLike
I just received my Janome 9400. This machine practically sews on it’s own! I love it!
LikeLike