Janome MC550E monsters……and a variation on the design!

IMG_4800

Have you seen our Janome monster stuffies? Janomeman made these (above) using one of the new built-in designs on our Janome MC550E. Many of us have been having fun making even more of them such as this livid lime green/yellow fleece monster complete with hair! 

or these?

While I was stitching these in the BIG RE 36b hoop on the Janome MC550E, I got to thinking…..”what if” I edited the outline of the long skinny monsters above that look a bit like fat worms? What if I omitted the eyes, mouth and dots, made the oval shape a little wider/bigger and then added in my own writing/message? 

I used the alphabet font on the Edit screen of the Janome MC550E although I could certainly have done this using Janome or Artistic embroidery digitizing software too. 

First I stitched the oval placement line as in the pic below. This is important as you need to know where to layer the back of the pillow (or monster) when you are ready to add this.

I added the letters ZZZZZ and some dots….. as my plan was to embroider a lovely soft and fleecy neck roll pillow. I made each Z a different color – all this can be done on the edit screen or in embroidery software. The pic below shows this stitching out.  I used a small piece of water soluble stabilizer on top of the fleece so that the stitches would not sink down into the fluff/pile of the fleece. It tears away very easily when you are done with the embroidery as the needle perforates the stabilizer. And it is water soluble in case some bits remain. 


Lastly, I added another layer of fleece over the top of what had already been stitched in the hoop. It stitches a double line – the outer line is the cutting line and the inner line is the seam of the stuffie, or in this case, my neck roll pillow. It leaves a hole for turning the pillow out to the right side. I slip stitched this closed after I had stuffed the pillow with pillow fill. Yes, I have to admit I very occasionally do the “dirty H word”!

 

You might notice I am using a different foot here: this is the HIGH shank Convertible free motion foot set with the closed toe. I decided to use this for these thickish fleece monsters and this pillow as I was able to adjust the height of the foot using the spring/screw so that my foot was raised up a bit and allowed more space under the foot for the thicker fleece.

Are you inspired to make some monster stuffies…….or a comfy neck roll pillow or two?

They sure are quick and fun to make.

About Liz Thompson

I am the National Education Manager for Janome & Elna Canada and I LOVE to sew! I have been employed full time in the sewing and quilting industry for over 30 years so I bring a wealth of sewing knowledge & expertise to this blog. I enjoy all forms of sewing from quilting to sewing garments to machine embroidery and software. Pretty much everything in my life is seen through the eyes of a passionate sewer! I am constantly on the look out for fun, innovative and inspiring ideas to share with you all on this blog. I also love to sew, read, knit , crochet, travel and spend time with my family and friends.
This entry was posted in Janome Sewing Machine and tagged , , . Bookmark the permalink.

2 Responses to Janome MC550E monsters……and a variation on the design!

  1. Kay Warcup says:

    Those are wonderful Liz! Question for you – can you use the other foot on the 500E also? This would be wonderful for making the bags I love to make if it could be done.

    Like

Leave a Reply to Kay Warcup Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s