YES!! a reminder that the LIMITED TIME FREE TRIAL OFFER for our Artistic Digitizer software starts TOMORROW Thursday 1st October……the offer is back due to popular demand.
Please do NOT delay – Apply for your code as soon as possible as the free trial offer opens on 1st October.
HOW DO I GET THIS CODE?
- Go to http://www.janome.ca Promotions page – here is the link
- Fill in the online form in FULL and submit.
- You should receive the code for the free trial of the software within 48 hours to the email address you gave on the form. Check your spam or junk folders first before asking after 48 hours!
It is VERY IMPORTANT that you fill in the form in FULL. Make sure there are NO typo’s on your email address before you press submit. If you do not fill it ALL in, it will be considered null and void and you will not receive the code for the free trial.
There will be a limited time opportunity from 1st – 15th October to apply for the free code. Applications will close on the 15th October so you should act fast!
The free trial period ends on 31st October so your time to play with and use the software is limited – one month – MAKE SURE YOU USE THE TIME WISELY!
We highly recommend you apply timeously so that you have time to play with the software and come to a decision about purchasing the software at the end of the trial period when there will be wonderful discount pricing. See your favourite Janome Dealer to take advantage of the offer.
The code given to you for this free trial will EXPIRE on 31st October. So you will need to use the software before that date …… plan ahead now!
All through the month of October, we will publish at least 2 Janome Life posts per week on Artistic Digitizer so that you have lots of support, education input and inspiration to try out various features and techniques in this software. Please be sure to FOLLOW Janome Life blog so that you do not miss any of these posts.
Please also be sure to join the Artistic Digitizer Facebook group where Anne Hein, Software Specialist Educator, will have lots of creative Artistic Digitizer information for you all. This is an invaluable resource for Artistic Digitizer.
Janome Life 
Can this be used on the updated 9400
Sent from my iPad
>
LikeLike
I think you already asked this question. No, it is embroidery software for hoop embroidery. Your Mc9400 is not an embroidery machine but you do have Stitch composer software included with your machine which you can use to make new stitches for your machine. And no, the Mc9450 is still not an embroidery machine.
Liz
JANOME CANADA
LikeLike
How do i avail of the free trial offer for artistic digitizer please as I live in India? There is no Janome presence in India except for a dealer. I have a Janome 9900 and am looking at upgrading Jr V5 digitizer that came with my machine.
LikeLike
Hi Lillian,
What we are promoting here is only for North America. You would need to contact the Janome office which looks after India to find out if a similar offer is being offered there. Sorry but I have no information on that. You may need to contact Janome in Japan for more information or ask your dealer to make enquiries with the place they order Janome machines. I’m sorry but it might be that this is not available for India.
Liz
JANOME CANADA
LikeLike
I can’t seem to get a code Mary Foster — maryfo@optimum.net
LikeLike
Mary,
I think you misunderstand. PRE-registrations were open from Friday last week but they will only be sending out the codes from TOMORROW 1st October. You should receive yours within 48 hours of tomorrow. Please be patient. And you will only get it if you filled in the form online IN FULL and reside in North America.
Liz
JANOME CANADA.
LikeLike
I imagine this is just for embroidery machines?? I have a 9400. It would end be for the embroidery stitches on my machine would it? Many thanks. Katherine
Sent from my iPhone
>
LikeLike
Hi Katherine,
Yes, you are correct. Artistic Digitizer is a software to create and edit hoop embroidery designs so would not be for the MC9400. The Stitch Composer software which comes with the MC9400 allows you to create new and more stitches for the Mc9400. We have done many Janome Life posts on Stitch Composer over the years. The most recent was in August when our Janome Canada artisan, Melissa Marginet, wrote a lovely post showing how she made a keeper for her knitting needles where she used stitch composer to make original and clever stitches to indicate the needle sizes and also a little knitting emblem for embellishment.
Liz
JANOME CANADA
LikeLike