Have you ever tried to maneuver around tight corners and curves while stitching an applique? Can be a tricky task if you have a big or long foot! Much easier to sew with the Janome applique foot AP ……Liz (Janome Canada Educator) loves this foot.
This foot is short and “stubby” – just perfect for easily sewing around intricate applique shapes. I’m all about quicker and easier! Don’t you like doing quick & easy too?
And visibility for seeing your stitching is good as it is a clear plastic rather than a metal foot.
CREATIVE APPLIQUE USING JANOME MACHINE DECORATIVE STITCHES
Janome Life 
Will this foot fit the 7700? Thanks.
LikeLike
Hi
Yes, most of our accessory feet are available for 7mm and 9mm model machines. Your 7700 is a 7mm machine. Please ask your local Jnaome dealer to show you the AP foot for 7mm models.
Liz
JANOME CANADA
LikeLike
I have a Memory Craft 8900 QCP machine but I do not see the “ledge” for the second bar on the foot. Can I get a different foot holder? How is this different than just using an F foot (I don’t have 1200.)
Betty
LikeLike
Hi Betty,
Please check what foot holder you are using? I assume the regular clip on/clip off one for the MC8900? If so, it very definitely dooes work with this Applique foot AP. Please also check that you are using the 9mm AP foot and not the 7mm version. The 7mm version will not attach. Just “hook” the 9mm AP foot back bar on at the back of the foot holder first & then lower the presser foot to attach the second, front bar of the foot to the foot holder. Sorry, quite hard to show in words. Please ask yuor local Jnaoem dealer to show you how to attach the foot if you are still struggling.
Liz
JANOME CANADA
LikeLike
Liz, I would be helpful if you tell us what letter the feet are. Thanks
LikeLike
Hi Bev,
If you read the blog post again you will see that I did indeed put the letter for the foot: AP is there right next to the name of the foot.
Liz
JANOME CANADA
LikeLike